HOW TO UNLOCK IDEA NET SETTER
A new way to unlock huawei e1732 idea netsetter permanently
many people had problems with unlocking idea netsetter huawei e1732.
so here is a new method introduced by nill and it works 100%. first of
all you must have patience doing this. because the process it bit long.
and also you have to download some softwares. and while downloading the
software you will have to disable your antivirus as the crack for the
cdma workshop is considered a virus by many anti virus softwares. so
these are the things that you should note while unlocking your huawei
e1732 idea netsetter usb modem. and also you should not start your
huawei e1732 dashboard
so here is the step by step guide to unlocking huawei e1732 idea netsetter
download the cdma workshop and save the cdma workshop v 2.7.0. you must disable antivirus before opening the cdma workshop
download huawei e1732 downgrader
insert a non idea sim to your huawei e1732 netsetter
now you must find the common port to which your huawei e1732 modem is connected. you can do this by.
Right click on your “My Computer” icon > Properties > Device
Manager > Ports (COM & LPT) > HUAWEI Mobile Connect – 3G
Application Interface (COM[The port number appear in your system])
note down the com port number into which your huawei e1732 idea netsetter modem is connected
Run “CDMA Workshop v2.7.0.exe”
Select the Port that you noted from your Device Manager under the Port option in “COM Settings (AT mode)” under the “Main” tab.
- then click on connect and then click on read
Go to the “Security” tab > Type “000000” in the blank box under
“SPC” > Click on “SPC” button > Click on “Send” with Default
(nv_read) as SPC.
Click on “Memory” tab > NV Items > Read > Now a “Conform”
box will appear > Click “OK” > Now a “NV Items Backup” box will
appear > In the box straight to “Last NV Item” type “9999” > Click
“OK” > Save the file by giving a file name you like (Eg: E1732Unlock
etc.)
When the buffer reach “100%” your file is saved successfully >
Now a “Information” box will appear > Click “OK” > Minimise “CDMA
Workshop v2.7.0”
Run “E1732 Downgrader” > accept the agreement > Next >
Wait for a few seconds until the search for your modem finishes >
(Don’t mark on “Auto remove the device after update”) Next > (Don’t
remove your data card until the process is finished) > Start > At
the end of “Downloading Programs…” you will get a “Update Failure!”
error dialog box (DON’T WORRY & DON’T GET DISAPPOINTED) > Click
“OK” > Click “Finish
Restore “CDMA Workshop v2.7.0” > “Main” tab > Disconnect
Unplug your Idea Netsetter (Modem) from your computer.
Again Plug it to the Computer > Check the “Port” again from the “Device Manager”
Go to “CDMA Workshop v2.7.0” select the Port that you noted from
your Device Manager under the Port option in “COM Settings (AT mode)”
under the “Main” tab as we did before > Click on “Connect” >
“Memory” tab > NV Items > Click on “Write” > A “Confirm” box
will appear > Click “OK” > “Open” dialog box will appear > Open
the file that you saved before > When the buffer reach “100%” a
“Information” dialog box appears with a success message > Click “OK”
> “Main” tab > Disconnect
Now close “CDMA Workshop v2.7.0” > A “Confirm” dialogue box will appear > Click “NO”
Close everything > Enable your Antivirus
That’s it. Your Idea Netsetter E1732 is unlocked successfully.
Unplug Idea Netsetter (Modem) from your computer.
Again Plug it to the Computer.
Wait for Idea Netsetter to Start
Put a SIM Card other than IDEA to the Netsetter / ModemIf it again
shows “The SIM/USIM card not been detected or is invalid” (DON’T GET
DISAPPOINTED) > Click “OK” > Wait for the SIM card to be detected
> It will detect the SIM card and enjoy browsing with any other SIM.
to make new mobile apn settings you can download huawei mobile partner. read and download mobile partner from this page
many people are having problem while connecting to internet with other sim cards
now you can connect by any sim card with default IDEA net Setter Dashboard using these steps
If your Modem is detecting sim cards and you are getting errors then do this
for XP
1 Control Panel -> Phone and Modem (found directly in control panel
or in Printers and other hardware ) –> modem tab –> huawei mobile
connect 3g modem (which is present on COM ) –> –> properties
advance –> in extra initializing command use given commands and click
OK
for windows 7
start menu -. type phone and modem — click on it—>modems –>huawei
mobile connect 3g modem–properties–>change
settings–>advance–>extra initialization command–>use given
command
and if it ask for Country and area code then Country – India and Area Code – 91 and leave other blank
commands are here
Aircel – AT+CGDCONT=1,”IP”,”aircelgprs”
Airtel – AT+CGDCONT=1,”IP”,”airtelgprs.com”
BSNL – AT+CGDCONT=1,”IP”,”bsnlnet”
Idea – AT+CGDCONT=1,”IP”,”internet”
Reliance – AT+CGDCONT=1,”IP”,”rcomnet”
Tata Docomo – AT+CGDCONT=1,”IP”,”tata.docomo.internet”
Videocon – AT+CGDCONT=1,”IP”,”vinternet.com”
Vodafone – AT+CGDCONT=1,”IP”,”www”
if you have any trouble doing this please comment here
No comments:
Post a Comment